Spa-Time System Pure from Bayrol

Spa-Time System Clean

1 kg disinfectant for the piping system

Where is it used?

Over time, especially in the piping system, deposits are formed, which deplete the disinfectant and can then lead to problems with water treatment. This has a negative impact on the water quality. System Clean is a special granulate for deep cleaning of your spa's entire plumbing system.

Recommendation for use

For the cleaning process, use 200g of System-Rein per m3 per application BEFORE changing the water. Remove the filter cartridge and clean it with a filter cleaning agent, such as Spa-Time Cartridge Clean. Then replace the filters and switch on the filtration.

Add 200g of System-Rein per m3 of water into the separate filter box and let the circulation pump run for about 5 minutes. If dosing into the filter box or skimmer is not possible, dissolve the granulate in a bucket with approx. 5 liters of water and add it directly into the whirlpool water while the circulation pump is running. Allow to soak for approx. 1 hour, then circulate again briefly.

Then empty the whirlpool and rinse with clear water.

Do not use the whirlpool during this treatment. If necessary, clean the whirlpool tub e.g. with Spa-Time Surface Clean and then fill the whirlpool with fresh water.