PoolLab 2.0 Professional - Photometer with app incl. case
Case set for the professional PoolLab 2.0 photometer with app
Measure 3 parameters in parallel and synchronize them via WLAN or Bluetooth directly into the free LabCOM® cloud software or app on your cell phone / tablet.
The PoolLab® 2.0 photometer is a cost-effective, practical and easy-to-use tool for maintaining your pool at home. It provides accurate measurements of the chemical levels in your pool water, helping you to prevent problems and keep your pool water clean and healthy. The new PoolLab® 2.0 photometer has been developed to provide even more convenience for our users. Get ready for a new measuring experience!
PoolLab description
The PoolLab 2.0 is the perfect solution for professional water analysis of pools and spas. The fixed but interchangeable triple cuvette allows quick sampling by simply immersing the IP68 sealed PoolLab® into the water.
9 buttons allow direct access to the ZERO process (only 1x per measurement series required) as well as to the 24 different pool water parameters. The PoolLab® 2.0 has both Bluetooth® and WLAN to either actively connect to the free LabCom® software and app or to automatically synchronize the data with the LabCom® cloud in the background.
The test results are always assigned to the measurement source accounts individually created by the user. In the LabCom® software and app, it is possible to print reports, calculate the active chlorine content and even receive dosing recommendations based on individually entered water pfluents, among other things. The LSI index calculation is also offered via the app and software.
A free cloud service - which the PoolLab® 2.0 can automatically supply with data via WiFi - ensures that the software and app always work with synchronized data.
Scope of delivery
Case set
- 1 x PoolLab® 2.0 with Bluetooth® and WiFi (IP68 waterproof)
- 1 x 3-cavity cuvette (interchangeable)
- 1 x light protection cap
- 3 x plastic stirring rod
- 1 x 10ml syringe
- 3 x AA batteries
- 1 x instruction manual
- 1 x storage bag
- 1 x hard case to protect the photometer
- Free LabCOM® software
- Free LabCOM® app
- Free LabCOM® cloud service
Reagents
- 20 tablets Phenol Red
- 20 tablets DPD N° 1
- 10 tablets DPD N° 3
- 10 tablets Alkalinity-M
- 10 tablets CYA-Test
All tablets are photometer tablets.
Glycine reagent tablets are not included in the basic kit
Parameters
| O2 | FCI | H2O2 LR | PO4 LR | Zn |
| ALK | CCI | H2O2 HR | PO4 HR | |
| AI | TCI | Fe | K | |
| NH3 | CI2 HR | NO3 | NO2 | |
| Br2 | CIO2 | O3 | SO4 | |
| CH | Cu | pH | CaCO3 | |
| NH2CI | CYA | PHMB | CH4N2O |
Parameter extensions can be installed via updates (LabCOM® app/software).
Information on the available reagents
Tablets
The Water-i.d.® reagent tablets have been distributed worldwide for several years. All tablets are produced, blister-packed and packaged in Germany. They are available in packs of 50, 100, 250 and 500. The advantages of the tablets are a long shelf life, precise dosing and easy handling.
Liquid reagents
Some parameters can or must be measured with liquid reagents (see parameter list). Liquid reagents do not require the tablet to be crushed. Available in different volumes.
Powder Pillows
Powder pillows are required for some tests. All Powder Pillows are produced, blistered and packaged in Germany.
Measurable parameters
| # | Parameters | Tablet method | Drop method | |
| 1 | Active oxygen (MPS) | O2 | 0.00 - 20.0 mg/l (ppm)* | -- |
| 2 | Alkalinity | ALK | 0 - 200 mg/l (ppm) | -- |
| 3 | Aluminum | Al | 0.00 - 0.30 mg/l (ppm)* | individually |
| 4 | Ammonium | NH3 | 0.00 - 1.20 mg/l (ppm)* | single |
| 5 | Bromine | Br2 | 0.00 - 13.0 mg/l (ppm)** | 0.00 - 9.00 mg/l (ppm)* ** ** |
| 6 | Calcium hardness | CH | single | 0 - 500 mg/l (ppm)* |
| 7 | Chloramines | NH2Cl | 0.00 - 6.00 mg/l (ppm) | -- |
| 8 | Chlorine (fCl / cCl / tCl) | Cl | 0.00 - 6.00 mg/l (ppm) | 0.00 - 4.00 mg/l (ppm)* |
| 9 | Chlorine (HR) | Cl | 5 - 200 mg/l (ppm)* | -- |
| 10 | Chlorine dioxide | ClO2 | 0.00 - 11.0 mg/l (ppm)** | 0.00 - 7.50 mg/l (ppm)* ** ** |
| 11 | Copper | Cu | 0.00 - 5.00 mg/l (ppm)* | -- |
| 12 | Cyanuric acid (Stabil.) | CYA | 0 - 100 mg/l (ppm) | -- |
| 13 | Waterst. Peroxide (LR) | H2O2 | 0.00 - 2.40 mg/l (ppm)* | -- |
| 14 | Waterst. Peroxide (HR) | H2O2 | 0 - 180 mg/l (ppm)* | -- |
| 15 | Iron (LR) | Fe | 0.00 - 1.00 mg/l (ppm)* | individually |
| 16 | Nitrate | NO3 | 0 - 50 mg/l (ppm)* | single |
| 17 | Nitrite (LR) | NO2 | 0.00 - 1.50 mg/l (ppm)** | single |
| 18 | Ozone | O3 | 0.00 - 4.00 mg/l (ppm)** | 0.00 - 2.70 mg/l (ppm)* ** ** |
| 19 | pH | pH | 6.50 - 8.40 pH | 6.50 - 8.40 pH* |
| 20 | PHMB | PHMB | 5 - 60 mg/l (ppm)* | -- |
| 21 | Phosphate (LR) | PO4 | 0.00 - 4.00 mg/l (ppm)* | individually |
| 22 | Phosphate (HR) | PO4 | 0 - 80 mg/l (ppm)* | single |
| 23 | Potassium | K | 0.70 - 12.0 mg/l (ppm)** | -- |
| 24 | Sulphate | SO4 | 5 - 100 mg/l (ppm)* | -- |
| 25 | Total hardness | CaCO3 | -- | 0 - 500 mg/l (ppm)* |
| 26 | Urea | CH4N2O | 0.10 - 2.50 mg/l (ppm)* | individually |
| 27 | Zinc | Zn | 0.00 - 1.00 mg/l (ppm)* | -- |
* Reagents not included in the basic kit
** Requires Glycine tablets if chlorine is present in the sample water - Glycine tablets are not included in the basic kit
Free software, app, cloud
A free cloud server ensures that the data from the app and software is constantly synchronized if the user opts for this function.
- Free software
- Free app
- Free cloud
The LabCOM® cloud solution (free) takes less than a minute to register and provides full access to all test results. Visit our Cloud section to learn more.
Compatible with LabCOM Cloud / Android / iOS / Windwos.
Video tutorials
Single measurement (1 parameter)
Multiple measurements (2-3 parameters)
Sharing on LabCOM® Cloud
Replace cuvette
Here you will find various items for your wellness oasis.
Spare parts, accessories, fragrances, suitable for your swim spa, hot tub or pool.
