Spa-Time Chlorine Granules from Bayrol

This chlorine granulate disinfects the spa water reliably and dissolves quickly without leaving any residue. The micro-spheres are pH-neutral, dust-free and can be used with any water hardness. The granules are immediately effective against bacteria, impurities and Turbidity.

== >> Use biocides carefully. Always read the label and product information before use!

 Advantages
- Dust-free micro spheres,
- pH neutral
- Kalk-free
- Stabilizing effect on free active chlorine in the water
- Can be used at any water hardness
- Dissolves quickly without leaving residues
- Prevents too rapid chlorine degradation in strong sunlight and higher water temperatures

Product description
Quickly dissolving chlorine granules

 
Ingredients
100 g of the product contain 100 g of troclosene sodium dihydrate

 
Recommendation for use
We recommend checking the chlorine level with SpaTime test strips at least once a week and, if necessary, adjusting it to the ideal value of 1.0 - 1.5 mg/L. The dosing amount depends on the measured chlorine value, to prevent water treatment problems, make sure that there is chlorine in the water at all times. Add the chlorine granules directly into the water after each spa use with the pumps running.

Tip
Before each application of the chlorine granulate, you should check the pH value using SpaTime test strips and, if necessary, correct it to the correct value of 7.0 - 7.6. Only in this way can the Chlorine granulate can develop its full effectiveness and is not used up prematurely.