Spa-Time active oxygen granules from Bayrol

Spa-Time Active Oxygen Granules from Bayrol

For chlorine-free water disinfection with immediate effect

Advantages
- Odorless and noticeably pleasant water quality without chlorine, gentle to skin and hair 
- Extremely skin-friendly in the application concentration
- Quickly soluble without leaving residues
- Free of heavy metals

Application area
This active oxygen granulate disinfects your whirlpool water in a gentle way. Thanks to this absolutely chlorine-free and odorless method, the water feels particularly natural and pleasant and is therefore gentle on skin and hair. To increase the effectiveness of the granules, you must also use the SpaTime Active Oxygen Activator.

== >> Use biocides carefully. Always read the label and product information before use!

Product description
Fast dissolving oxygen granules

Ingredients
100 g of the product contains 100 g of pentakalium bis(peroxymonosulfate) bis(sulfate). 

Recommendation for use
Check the active oxygen content using Spa-Time test strips immediately after the active oxygen granules have been completely dissolved, otherwise it will not be possible to take a correct measurement at a later stage. The value should be at least 8 mg/L. If the value of 8 mg/L is not reached, add the same amount of active oxygen granules to the water again. Before each use, add active oxygen granules directly into the spa water with the circulation pump running. If the spa is heavily used, add twice the amount of active oxygen granules to the water to ensure adequate disinfection.

Tip 
Before each application of the active oxygen granulate, you should check the pH value using SpaTime test strips and, if necessary, correct it to the correct value of 7.0 - 7.6. Only in this way can the active oxygen granulate develop its full effectiveness and not be used up prematurely.
10-20 g/m3 before each use