The ultimate photometer! PrimeLab® 2.0 - Starter Kit with 35 parameters plus ProbeBOX 1.0 with pH electrode
The next generation electronic multi-pool tester. For highly precise measurement results of almost all water values.
Measure 18 different wavelengths in parallel (3 sensors with 6 wavelengths each). This covers the entire visible spectrum, as well as important parts of the UV and IR spectrum - LEDs are provided at 90° and 180° to enable nephelometric measurement of turbidity (NTU), PTSA and fluorescein measurements.
Description
With the PrimeLab® 2.0 you can accurately analyze almost any water value. Whether it's standard values such as chlorine and bromine, or values such as nickel, sulphate or DBNPA, the PrimeLab has it all.
Unlike conventional devices, it can receive and process data from 18 different waveforms simultaneously. The bandwidth of 410 - 940 nm even makes it possible to read out IR and UV spectra. The additional LEDs even enable the measurement of NTU turbidity, PTSA and fluorescein - all without any additional adapters.
Features PrimeLab® 2.0 Multitest Photometer
- 5.5'' HD color touch display
- 18 wavelength scanning (410-940 nm)
- 90° ready" for NTU, PTSA, fluorescein, plankton
- Selection of over 140 different parameter methods (activation required for a fee)
- Option to record and save your own methods
- 8.400 mAh Li-ion battery (permanently installed)
- Bluetooth 4.2
- WiFi
- USB Type C
- GSM (via USB Type C modem)
- Connection for electrodes (via USB Type C and A/D converter box)
- built-in camera for scanning QR codes
- Self-calibration mode with certificate (via LabCOM software)
- "I-OTZ" Intelligent One-Time-Zero
- Compatible with the free PrimeLab
- Connectivity solutions: LabCOM app/software/cloud (Android, iOS, Windows, Mac, browser)
Scope of delivery
PrimeLab® 2.0 starter kit
- 1 x PrimeLab® 2.0 Multitest photometer
- 1 x carrying case (gray with foam insert)
- 10 x 24mm/ 10ml cuvettes with lid (light protection integrated in the lid)
- 1 x light protection lid (for 16mm and 1ml cuvettes and reference sets)
- 1 x 24 mm cuvette adapter (already installed but interchangeable)
- 2 x 10.5 cm stirring rod
- 1 x 10 ml plastic dosing syringe
- 1 x cuvette cleaning brush
- 1 x Microfiber cloth for cleaning cuvettes
- 1 x Battery charger with USB cable, type C
- 1x Printed instruction manual in a ring binder with tabs
ProbeBOX 1.0 electrode starter kit
- 1 x converter box with BNC-in and USB type C-out (connection to PrimeLab 2.0)
- 1 x USB cable type-C / type-C
- 1 x dropper bottle with 10 ml KCl electrode protection solution
- 1 x 20 ml "pH 4.01" calibration solution (sachet)
- 1 x 20 ml "pH 7.00" calibration solution (sachet)
- 1 x 20 ml "pH 10.01" calibration solution (sachet)
- Printed instructions for use
Reagents
The kit does not contain any reagents
Parameters
The following measurable parameters are included in the kit
# | Parameters | Tablet method | Drop method | ||
1 | Active oxygen (MPS) | O2 | 0.00 - 40.0 mg/l (ppm) | -- | |
2 | Alkalinity | ALK | 5 - 200 mg/l (ppm) | -- | |
3 | Aluminum | Al | 0.00 - 0.30 mg/l (ppm) |
| |
4 | Ammonium | NH3 | 0.00 - 1.0 mg/l (ppm) |
| |
5 | Bromine | Br2 | 0.00 - 18.0 mg/l (ppm) | 0.00 - 18.0 mg/l (ppm) | |
6 | Calcium hardness | CH | -- | 0 - 500 mg/l (ppm) | |
7 | Chloramines | NH2Cl | 0.00 - 8.00 mg/l (ppm) |
| |
8 | Chlorine (fCl / cCl / tCl) | Cl |
| 0.00 - 8.00 mg/l (ppm) | |
9 | Chlorine (HR) | Cl | 5 - 200 mg/l (ppm) | -- | |
10 | Chlorine dioxide | ClO2 | 0.00 - 15.0 mg/l (ppm) | 0.00 - 15.0 mg/l (ppm) | |
11 | Copper | Cu | 0.00 - 5.00 mg/l (ppm) | -- | |
12 | Cyanuric acid (Stabil.) | CYA | 2 - 160 mg/l (ppm) | -- | |
13 | Waterst. Peroxide (LR) | H2O2 | 0.00 - 3.80 mg/l (ppm) | -- | |
14 | Waterst. Peroxide (HR) | H2O2 | 0 - 200 mg/l (ppm) | -- | |
15 | Iron (LR) | Fe | 0.00 - 1.00 mg/l (ppm) | individually | |
16 | Manganese (LR) | 0.20 - 5 mg/l (ppm) |
| ||
17 | Nitrate (HR) | NO3 | 1 - 100 mg/l (ppm) | single | |
18 | Nitrite (LR) | NO2 | 0.00 - 0.50 mg/l (ppm) | single | |
19 | Ozone | O3 | 0.00 - 5.40 mg/l (ppm) | 0.00 - 5.40 mg/l (ppm) | |
20 | pH | pH | 6.50 - 8.40 pH | 6.50 - 8.40 pH | |
21 | PHMB | PHMB | 2 - 60 mg/l (ppm) | single | |
22 | Phosphate (LR) | PO4 | 0.00 - 4.00 mg/l (ppm) | single | |
23 | Phosphate (HR) | PO4 | 0 - 80 mg/l (ppm) | single | |
24 | Potassium | K | 0.70 - 12.0 mg/l (ppm) | -- | |
25 | Sulphate | SO4 | 5 - 100 mg/l (ppm | 5 - 100 mg/l (ppm | |
26 | Total hardness | CaCO3 | -- | 0 - 500 mg/l (ppm) | |
27 | Urea | CH4N2O | 0.10 - 2.50 mg/l (ppm) | 0.10 - 2.50 mg/l (ppm) | |
28 | Zinc | Zn | 0.00 - 1.00 mg/l (ppm) | -- |
Don't worry if a parameter is missing, because you can purchase a code at any time to activate additional parameters.
The PrimeLab software and app are always updated via the Internet and always offer you the most up-to-date list of available parameters.
So your PrimeLab is always up to date! You can view the latest parameter list at www.primelab.org.
Also included in our PrimeLab 2.0 kit:
- PrimeLab 2.0/ProbeBOX 1.0 Electrode starter kit "pH / Temp." (plastic body)
- Measuring range: 0.00 - 14.00 pH / 0 - 80°C
- Automatic temperature compensation (ATC)
- 1 x gray plastic case with foam insert
- 1 x "PL2Sp-ElpHPCATC" Plastic-Body pH Electrode.
- Designed for pH measurement of general water solutions / measurement in scientific research, environmental monitoring and quality control.
- Ideal for laboratory and field use. Ideal for pH measurement
- in aqueous solutions up to pH <12 and constant
- Testing at temperatures <60 °C. Very well suited for field and laboratory use.
- 8-pin BNC plug with IC, cable length 1 meter.
Video tutorials
Promo German
How to start a measurement
Replace adapter
- Download PrimeLab ProbeBOX Manual DE
- Download PrimeLab 2.0 Manual DE
- Download PrimeLab 2.0 Quick Start
- Download PrimeLab 2.0 ProbeBOX Manual FR
- Download PrimeLab 2.0 ProbeBOX Manual EN
- Download PrimeLab 2.0 Manual FR
- Download PrimeLab 2.0 Manual EN
- Download Übersicht Parameter und benötigter Reagenzen
- Download PrimeLab ProbeBOX Manual DE
- Download PrimeLab 2.0 Manual DE
- Download PrimeLab 2.0 Quick Start
- Download PrimeLab 2.0 ProbeBOX Manual FR
- Download PrimeLab 2.0 ProbeBOX Manual EN
- Download PrimeLab 2.0 Manual FR
- Download PrimeLab 2.0 Manual EN
- Download Übersicht Parameter und benötigter Reagenzen
Here you will find various items for your wellness oasis.
Spare parts, accessories, fragrances, suitable for your swim spa, hot tub or pool.