SpaBalancer Starter-Set II - for hot pots and sand filter systems

The SpaBalancer starter set II consists of

• 1 bottle of SpaBalancer basic 1.0 l
• 1 bottle of SpaBalancer UltraShock 1.0 l
• 1 bottle of Soft Water 0.5 l
• 1 can of SpaBalancer pH-Minus granulate 1.5 kg
• 1 SpaBalancer Pool Tester incl. 30 tablets each for measuring UltraShock and pH value
• 1 electronic pH tester incl. 2x calibration liquid
• The set is supplied in a special jute bag.

Have you bought a new wooden hot tub or a sand filter system and want to master water care without problems, chlorine or time-consuming measures? Then we have just the thing for you. With these products you are well equipped for everything. You will have water as fresh as a mountain stream. The weekly maintenance effort is just 5 minutes. You no longer need to shower after your bath to get rid of the chlorine smell. You no longer need to apply cream after bathing. Even people with neurodermatitis or simply sensitive skin can now enjoy their bathing fun again without any worries.

Water care with SpaBalancer

Refilling

1. After refilling, first fill with SpaBalancer SoftWater.
2. Optional: If the water is very hard, we also recommend filling it with the SpaBalancer SoftWater filter.
3. Then add SpaBalancer and Ultrashock according to the table (day 1 Ultrashock, day 2 SpaBalancer), see under "Downloads" - "Water care instructions"

== >> Use biocides with care. Always read the label and product information before use!

Do not add SpaBalancer and Ultrashock together. Always add Ultrashock on the first day and SpaBalancer one day later. The water may become cloudy when SpaBalancer is added. This clouding normally disappears the next day.

Shelf life
Ultrashock should always be stored upright, not lying down! Never buy in stock, as Ultrashock has a limited shelf life (max. 1 year). It loses approx. 8 to 10% of its effectiveness per month. It should be stored in a cool, dark place. The specified quantities should then be increased to compensate for the decreasing effectiveness after the expiration date.

Filter cleaning

The filters should be cleaned twice a week for the first two weeks. Thereafter as required. However, at least every two weeks. You will need a second filter to change.

1. Place the filter in a suitable container and insert the replacement filter into the pool.
2. pour 50 ml of SpaBalancer FilterClean Natural into the hot water (approx. 55°C). The filter must be completely covered by the water.
3. Leave the filter in the cleaning solution for at least 12 hours (preferably overnight).
4. Rinse the filter thoroughly. Any residual filter cleaner may cause foaming in the whirlpool tub.
5. Finally, allow the filter to dry and store it until the next filter change.
   Optional: For even more intensive cleaning, soak the filter overnight in a bucket with 10 liters of water and 20 ml of UltraShock. This will make the filter even whiter and remove the last remaining biofilm.