Tangit PVC cleaner primer - 125 ml can

This Tangit cleaning agent for PVC-U and PVC-C and ABS adhesive joints, is ideal for cleaning and lightly dissolving whirlpool, swim spa, swimming pool and piping before bonding so that the adhesive joint holds perfectly.

• Reliably removes impurities and residues 
• The cleaner dries without leaving residues and a high level of cleanliness of the glue joint is achieved
• Ensures optimal dissolution for a secure adhesive bond
  
  

INTENDED USE: 

• We recommend that you only glue the PVC pipes and fittings after cleaning them with this Tangit cleaner. This is the only way to ensure a safe and stable adhesive connection
• Special cleaning agent for the preparation of adhesive joints made of PVC-C and PVC-U and ABS 

PRODUCT ADVANTAGES:

• Consistent and constantly controlled quality 
• This is the only way to ensure a secure bonded joint with Tangit pipe adhesives
• Reliable removal of impurities and residues 
• Prevents leakage problems due to its excellent cleaning properties
• Very good cleaning properties
• Very good dissolving properties of the components to be bonded
  
  

PROCESSING INSTRUCTIONS:

1. Cut PVC pipe at right angles and then bevel slightly on the outside and deburr(15°) . 
2. Pre-clean and dry the bonding surfaces.
3. Mark the pipe penetration depth on the pipe end.
4. Apply Tangit Cleaner to an absorbent paper towel to thoroughly clean the dry bonding surface.
5. The bonding area is now prepared to be bonded with the Tangit Special Adhesive.

HAZARD WARNINGS:

• Always wear suitable protective clothing when using Tangit Cleaner
• Please also refer to the Technical Data Sheet and the Safety Data Sheet

EFFICIENCY:

The content is sufficient for approx. 10 adhesive joints for a pipe diameter of 63 mm

PACKAGING CONTENT: 125 ml